Creality Sermoon S1 case insert for Scan Bridge and marker gemoetries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After getting the Scan Bridge I wanted a better fitting case insert to allow storage of all necessary parts and helpers
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 151
- Wydruki
- 2
- Wyświetlenia
- 813
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Also look at my other accessories for the Sermoon S1!
Description:
This insert allows more efficient storage of all your accessories in the original case of the Sermoon S1.
Insert accommodates:
- Scanner (including my lens protectors: https://www.printables.com/model/1396605-creality-sermoon-s1-lens-protector-usable-while-sc)
- Scan Bridge
- Scan Bridge cable
- Wireless Dongle for the Scan Bridge
- Phone Holder of the Scan Bridge
- Lens cleaning cloth
- USB cable for the scanner (in my case the longer one from the RaptorX)
- 100W USB-PD powerbrick (UGREEN Nexode X 100W)
- USB-PD to 12V barrel jack cable to power the scanner: https://de.aliexpress.com/item/1005006058252700.html?gatewayAdapt=glo2deu
- other cables you need
Geometry Holder accommodate:
- 25 full size marker geometries
- 20 half marker geometries
The foam containing the calibration plate can be left in place.
Marker geometries are best printed from a black, light absorbing plastic or painted black.
The storage for the markers has to be printed from TPU, the case insert should be printed from TPU.
My print settings:
- Creality K2 Plus
- 245°C Nozzle with 20mm3/s max flow
- 0.8mm nozzle, 0.4mm layer
- 1 wall, 3 top (at 1.1 flow), 3 bottom
- 11.5% infill CrossHatch
Printed from TPU with my settings the insert takes ~790gr and the marker holder ~170gr.Printed from TPU with my settings the insert takes ~790gr and the marker holder ~170gr.