1 / 4
Pagoda 2 Armor - FPV Drone Antenna Cover — zdjęcie 1
1 / 4

Pagoda 2 Armor - FPV Drone Antenna Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Armor Cover for the Pagoda 2 antenna

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
78
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

This is a print which solves the biggest problem with the Pagoda 2 antenna — durability. It's a really simple print and tight fit, so with just few minutes of printing, you can be sure that your antenna is gonna last way longer. You can add some B7000 glue for the best results.

Print it out of TPU (or any other flexible material)
No supports, it's already oriented
Infill doesn't matter, as long as you have 2 walls
Print with 0.4 nozzle. 0.8 and 0.2 should also work fine.
Enable "avoid crossing walls" to prevent stringing
Add some B7000 glue for the best results

Tagi