1 / 2
Mammotion Yuka 2024 front wheel hub
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part, use different hardware
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 623
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v3.0
This hub replaces the original one, the tyre is still needed. Mine failed twice due to humidity in bearings.
This model uses skateboard bearings (608RS) instead.
Bill of material
| Qty | Hardware | note |
| 3 | M3x50 SHCS screws | |
| 3 | M3 nuts | |
| 2 | Bearings 608RS | (skateboard) |
| 2 | M8 Washers |
Print settings:
- Material: ASA,
- no support
- Line width 0.4mm, layer height 0.2mm
- 40% infill,
- 5 layers top and bottom,
- 4 perimeters,
- adjust shrinkage compensation according your material