1 / 5
3D printed plunger tube for Finisher 3.X Nerf blaster — zdjęcie 1
1 / 5

3D printed plunger tube for Finisher 3.X Nerf blaster

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

No PVC tube ahead? No problem! Now you can print whole piston just with regular filament.

Ocena
0 / 5
Polubienia
42
Pobrania
100
Wydruki
0
Wyświetlenia
768
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Hey guys,
I'm trying to eliminate as many non-printable parts from my designs as possible. On my journey to conquer this noble quest I tried a few approaches to get rid of the PVC tube, only to find out that Sillybutts had already solved this problem.
Now I'm bringing you a 3D-printed piston for my Finisher blaster, based on Silly's idea.

I also tried to make the FPS of projectiles more consistent, so I made a new version of the piston with an integrated spring. This mechanism pushes the cylinder against the drum and should reduce potential air leaks during firing. However, I didn’t notice any big improvement after adding this feature, and it also increases the risk of damaging the EVA seal by dry-rotating the drum. So it’s up to you whether you want to include it or not. If you do, and you still want to use a PVC tube, you’ll need this modified cylinder head. The fully 3D-printed cylinder is compatible with the spring piston, but you can also use it without the spring

You can see all Finisher retlated models in this collection:
https://www.printables.com/@SSmithy_3054362/collections/2397585

As usual

I spent hours on this design, so if you like it — or if you're just curious about what might jump out of my head next time — you can support me here:
https://buymeacoffee.com/ssmithy

or here if you prefer crypto:
https://nowpayments.io/donation/SSmithy

If it happens that you'd like to use this design commercially, let me know in a DM. We'll see what we can do.

Parts

Altered

S04_Piston
S05_Cylinder head

New

S04b_Piston strig
S05a_Cylinder
S05b_Cylinder lining

Materials

The main goal here is to make the inner surface of the lining as smooth as possible. I get the best results with ironing on and running in the direction of the piston’s movement. Depending on the chosen filament, I need to adjust the ironing flow rate. I get slightly better results with PETG than with PLA, but maybe I just didn’t have enough patience to find the right settings.
Also, the spring has to be made of PETG. Other parts can be PLA.

This is the intended orientation of the parts:

Assembly

Piston: Just insert the spring into slot on piston this way:

Cylinder: You need to roll the S05b_Cylinder lining and insert it into the S05b_Cylinder part (see pictures). The ends of the lining can't overlap each other. It may take a bit of effort to do it properly, but it should be possible if you keep trying. In case you get desperate, try to shorten the longer dimension of the lining by about 0.1 mm in the slicer, or with a scalpel. You now have the S05_Cylinder head with an integrated tube, and you can follow the assembly manual of the original model here:
https://www.printables.com/model/1282383-finisher-30-nerf-blaster

So that's all for now. Good aim and a steady hand, Sheriff ;)

Tagi