Lionel Polar Express Cross Track
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of Brandon's awesome Lionel Polar Express straight track. Last year for Christmas I printed a heap of…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 72
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a remix of Brandon's awesome Lionel Polar Express straight track.
Last year for Christmas I printed a heap of track to make my train travel a longer path. This year I wanted something different. So I took the straight track, rotated it by 90 degrees and smashed the two parts together and with a bit of editing to remove excess pieces, we now have a Cross Track.
I've tested this quite a bit over the past few weeks and it works really well, and you should now be able to extend your track a lot further. At a rough guess, I have around 8-10 metres of track printed now.
Enjoy.
Print Settings
Printer Brand:
Wanhao
Printer:
Wanhao Duplicator i3 V2
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
20 - 30
Filament: Any PLA Black Post-Printing =============
Supports
There are supports that require removing.
I've found that having an angled support (45 degrees) works really well, and they're easier to remove than straight supports.
Category: R/C Vehicles