69 Mustang Wing/Spoiler Mounting JIG & CAP
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are mounting JIG for drilling your hole to mount a OEM/NOS Wing/Spoiler on your Decklid with 35 7/8 on center…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
These are mounting JIG for drilling your hole to mount a OEM/NOS Wing/Spoiler on your Decklid with 35 7/8 on center mounting points. I built these off specification provided for the NPD Wing (44210-1). If you bought an after market wing make sure its meant for 35 7/8" Mounting holes from Left to right.
This doubles as a bit of a reinforcement bracket and i provided caps to cover them for a bit cleaner look even though your screws will go through these as well
Print in PETG or ABS. PLA will deform and be weakened by heat
Print Settings
Rafts:
No
Supports:
No
Resolution:
.06
Infill:
30
Category: Automotive