69 Mustang or FORD Mini ATX Fuse Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed for my 69 Mustang but i have found this will fit multiple models such as a 69 Cougar or 71 Torino Fuse…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Designed for my 69 Mustang but i have found this will fit multiple models such as a 69 Cougar or 71 Torino
Fuse holder/adapter based off https://www.thingiverse.com/thing:1893269
**Mini ATX Adapter for our 69 Mustang buss fuse panels.***This requires cutting the brass bar into sections, beveling out the edge, and soldering connectors to it*
- ACC Type - For adding the Accessory wire where a fuse isn't present
- FULL - Where the fuse is present and has the screw connector
- ACC-Bolt - Allows you to add a small bolt to connect to the ACC Accessory instead of using a wire lead
Configuration Types: 1) - Bolt-On Requires removal of the unit and to put the bolt through. Does eliminate the ability to use the push on washer that holds it to the Wiring harness. Only matters for removal really
- Push-ON....The center hole will push around the bolt and is held in by the bus fuse holders.
Contacts: http://www.digikey.com/product-detail/en/keystone-electronics/3557/36-3557-ND/2092485
Brass Bar: https://www.amazon.com/gp/product/B0748DQ1MP
Print Settings
Printer Brand:
TEVO
Printer:
Nereus
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
35%
Category: Automotive