Travel - portable ski tuning stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight folding stand for ski waxing & edge tuning - can be used on floor/table/bench etc - fexible for travelling
- Ocena
- 5 / 5
- Polubienia
- 6
- Wydruki
- 0
- Wyświetlenia
- 284
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Standard Digital File License
Whilst table clamps are great I sometimes find it difficult to find a suitable surface to work with so I've made these lightweight travel stands. A pair can be used basically on any surface to support a single ski for waxing and basic edge tuning (suggest with a drop cloth/sheet). Combined with the TPU upper it gives a fairly reasonable grip but the ski will need to be held for scraping which I fine a managable compromise for the flexibility these offer as part of my ski kit.
Filament: not critical for the stand. PETG or even PLA will be sufficient. TPU should be used for the insert grips
No supports required.
The two base model STL files are the same, the diameter of the IMP 5/16" base is intended for imperial bolts which are a fraction smaller dia than M8
Hardware required: 2No. M8 or 5/16" bolts 40mm max long or 1 ½" for each stand.