Trailer for 1:10 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small and quick trailer for transporting your RC models :)
- Ocena
- 4 / 5
- Polubienia
- 127
- Pobrania
- 376
- Wydruki
- 0
- Wyświetlenia
- 3030
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
A small and relatively quick to print and assemble trailer in 1:10 scale.
You'll additionally need 2 M5 treaded rods 200mm long for the axles (I foud that continuous axles are no problem) and a few nut to set the position (see 3rd picture). Additionally you will also need 4 ball bearings with 16mm outer diameter and 5mm inner diameter.
For the trailer support you'll need a M5 nut and a ca 42mm long bolt.
You can add 5mm LEDs as break and turn lights if the towing vehicle can supply the needed voltage.
I printed the trailer on my Alfawise U20 so the models may have to be cut in order to fit on smaller machines (I've included the Fusion 360 File for that purpose)
Have fun :)