1 / 1
Pi logo bracket - no MMU/AMS or mid-print colour changes needed — zdjęcie 1

Pi logo bracket - no MMU/AMS or mid-print colour changes needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pi logo bracket I made to sit in front of my Pi on display. Prints in 3 parts (bracket, green and red plates).

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Pi logo bracket I made to sit in front of my Pi on display. Prints in 3 parts (bracket, green and red plates). The bracket itself is fairly beefy as I am using it to help prevent members of the public from removing the game controllers from the usb ports (a retro-pi build at my library). It also has a couple of recessed 3 mm screw holes, though there is heaps of room to use double-sided tape or other adhesives if you don't need it to be so secure.

Print the bracket in black (3mf - bambu studio kept throwing errors as I tried to export it as a stl) and the green and red stl files in appropriate shades. Thin enough for light to shine through.

I don't have an AMS/MMU at home so I wanted something easy and repeatable (no manual mid-print swaps), but if you have an AMS/MMU there is no reason why you can't set up a print by object.

Tagi