1 / 5
Aeropress Breville Basket 54mm Adaptor (Joepresso style)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
connect Breville coffee filter basket to Aeropress
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 77
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
I use my Breville dual wall filter basket on my aeropress to give more of an espresso type coffee. Give it a go.
You might know this from Joepresso. This is the same thing, but for a 54mm basket and designed to be 3d printed with no supports.
I print with PETG for the adaptor and TPU for the gasket.
Tip: Change the Z height on your slicer if you require a thicker or thinner gasket.
Best to use with a puck screen.
The only part to contact the coffee is the gasket, so use a TPU that you trust or buy a silicone gasket.