Neudoerfler Table Headphone Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a redesign of FoRTu BEKANT Table Headphone Hanger I had this hanger for my old Ikea Bekant table and was more…
- Ocena
- 4,333 / 5
- Polubienia
- 16
- Pobrania
- 115
- Wydruki
- 3
- Wyświetlenia
- 701
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This is a redesign of FoRTu BEKANT Table Headphone Hanger I had this hanger for my old Ikea Bekant table and was more than happy with it.
Now I switch to a Neudoerfler Flux-E table which has a thicker table top so I wasn't able to use the original hanger any more.
To my knowledge this should fit all table which have a thickness of 2,5 cm (or 0,98 inch)
The opening in the back should fit most micro-USB plugs to fit through.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
200
Infill:
10
Filament: 3DJake PLA Orange
Idea and making
I came up with a 'replica' of FoRTu design and tried to mimic it as good as possible using Fusion360. As you can probably see I am not that good in designing organic forms, but I still pulled it off.
Category: Office