2020 T-Slot-cover Voron branded
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-slot covers in 200mm and 400mm for Voron printers with 2020 extrusions.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 299
- Wydruki
- 1
- Wyświetlenia
- 1927
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Most Voron printers are based on 2020 6mm T-slot extrusions (aka Misumi extrusions). These covers close horizontal slots so dirt or screws won't get caught.
I print this with 2 perimeters and 23% infill, 0.2mm lineheight. It's a fast print and won't take much time or plastic. Cut to size for your requirements.
I designed these for a snug fit. If you have problems fitting them in, just give the back edges a wipe with sandpaper.
This print looks better in bi-color which is easy to achieve: If printing at 0.2mm lineheight, add a pause at layer 4 and swap the filament, then continue.