AXYZ Router Pressure Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Redesigned 3D printable Pressure foot for AXYZ Router (Originally created for Z7)
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 112
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
After many years, the pressure foot for our AXYZ Z7 router was starting to fall apart. I was never really happy with the dust collection of the unit anyway.
I created this Pressure foot that fits the original cylinders and uses the the same bottom foot as the original. The dust collection channer is much larger than the original, making it much more efficient at collecting debris.
It's printed as a single object, and it requires a printer that can print at least 300mm x 300mm.
For durability, I find that it will last at least a full year of daily use when printed in PLA pro or Hyper PLA. The nice thing about this is that as it starts to wear down, you can simply print another one for a few dollars. Much less expensive than the $1500+ that AXYZ would charge for a new pressure foot.
I would recommend using the original bottom foot, or cutting a new bottom foot from HDPE. We found that HDPE is a great material for the base as it's a natural lubricating plastic and will not mar or scratch sensitive materials.