1 / 5
1.25" shorter Canon EF to telescope adapter with locking pin — zdjęcie 1
1 / 5

1.25" shorter Canon EF to telescope adapter with locking pin

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

3D printable 1.25" camera to telescope adapter that gives extra space

Ocena
0 / 5
Polubienia
3
Pobrania
61
Wydruki
0
Wyświetlenia
175
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Hello,
this is the second adapter that I commonly use when connecting my Canon camera to telescope.
It is 1.25" so only works with crop sensors (APS-C) but may enable you to achieve a few extra milimeters of backfocus which is sometimes enough, like on my friends refractor. It of course comes with locking mechanism.

Settings:
Layer height: Any but I used 0.2mm
Supports: Yes, everywhere

If you find it useful, please leave a like, post a comment and add a make! Happy stargazing!

Tagi