Excalibonk (d20 mace)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mace, made from a tabletop RPG D20 die.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 250
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A handheld D20 mace, printed in two pieces.
You need 3x m3x12 socket head screws, 3x m3 heatset inserts, and as many colours as you plan to print in.
I printed the handle at 15% infill, 3 perimters, 3 top and bottom.
The die portion can be printed as one piece, or two. In either case I printed at 5% infill, with a height range modifier to print the “stem" of the head at 15% for a little more strength.
No, it won't stand up to being bashed against something. Yes, the “natural 20” is on the strike face of the mace if properly wielded. No, you can't roll it. Yes, I tried.