Vertical Stand for CISCO 800 Series Routers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first design of a vertical stand for Cisco 800 Series routers.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 510
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is my first design of a vertical stand for Cisco 800 Series routers.
The manufacturer does not offer such accessories, so I decided to design one myself.
The inner dimension of the width is 46 mm. The router's height is 44 mm without the rubber feet so I hope it fits.
Update Version V2:
Here's a new, lighter version of the Cisco 800 Series vertical stand. Now, the big pillars are much higher to provide more stability and I´ve added 4 mm holes to fix the router with screws or something, if you don´t trust the stand.
I´ve printed it in Fillamentum Rapunzel Silver PLA and Aprintapro Printament Lime Green. The printtime was 8h.
Print instructions
Category: Computer Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.20 mm
Infill: 10 %
Notes:
I've made the model with Fusion 360 and the support in Meshmixer.
"Cisco-print1.obj" is the model from Meshmixer without support.
"Cisco-print2.obj" is only the support.
The ETA in Slic3r PE 140.0.0-Alpha1 with
- 10 % gyroid-infill (only in Cisco-print1.obj),
no infill and no "Ensure vertical shell-thickness" in cisco-print2.obj
was 15h 22min.How I Designed This
The model was built for the most part from the company logo
I have not printed this model yet, so I can not say if the concept works and the low height is enough to keep the router vertical...but I'm confident.