1 / 3
Parameterisable (FreeCAD) Skadis mounts — zdjęcie 1
1 / 3

Parameterisable (FreeCAD) Skadis mounts

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Created some parameterisable common mounts for Skadis peg boards

Ocena
0 / 5
Polubienia
6
Pobrania
86
Wydruki
0
Wyświetlenia
257
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

As I was building my tool wall there were a lot of bits and bobs that didn't have a ready made Skadis model online yet and while there are some OpenSCAD models out there I didn't really like them so I threw together my own and the collection kind of grew as I saw the need for them.

The FreeCAD model contains:

  • Rectangular bin (2 pegs)
  • Small rectangular bin (1 peg)
  • Circular bin (2 pegs)
  • Small circular bin (1 peg)
  • Hook (pretty strong when printed flat)
  • Angled hook (for holding things at an angle)
  • Snap clamp (for those cilindrical things such as heat gun or soldering iron that snap into place)
  • Tape holder (similar to rectangular bin but with a radius inside for tape, soldering iron

All of the dimensions can be changed in FreeCAD in the Spreadsheet.

If you know CAD it's also fairly easy to duplicate one and use it as a base to modify a few things here and there to accommodate specific things (like I did with my oscilloscope and amp clamp)

Tagi