1 / 3
Height-adjustable spool holder for the Core One
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Height-adjustable spool holder for the Core One, Ball bearing mounted
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 1
- Wyświetlenia
- 201
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (16)Powiązane
Height-adjustable spool holder for the Core One.
Necessary for spools with a larger inside diameter
The original screws can be used.
You will need two ball bearings with the following dimensions: outer diameter 17 mm, inner diameter 6 mm, and width 6 mm.