1 / 7
Fatshark Batterypack for 18650 LiIon — zdjęcie 1
1 / 7

Fatshark Batterypack for 18650 LiIon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I designed a Housing for two 18650 LiIon Cells, to use with my Fatsharks. You also have a little space on the outside…

Ocena
0 / 5
Polubienia
6
Pobrania
27
Wydruki
0
Wyświetlenia
318
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

I designed a Housing for two 18650 LiIon Cells, to use with my Fatsharks.

You also have a little space on the outside to mount a capacity/voltage indicator board (I used one from banggood for 2s)

Today I got the cells and installed them. Works like a charm.

Its a bit bigger than the fatshark ones but it still fits in the headstrap (with a bit of gentle force)

Even though I solderded the cells and not pointwelded them, I do not recommend doing this unless you know what you are doing. But if you do it:

  • use a strong/hot soldering iron >80W (the one I used has 150W)
  • full heat but quick heating/soldering
  • never heat more than 5 sec.
  • let the cell completely cool off before soldering again

Category: R/C Vehicles

Tagi