1 / 10
Realacc diversity-module door for Fatshark DOM HD2/V3 (Updated Version) — zdjęcie 1
1 / 10

Realacc diversity-module door for Fatshark DOM HD2/V3 (Updated Version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Module bay door for the "Realacc RX5808 Pro Diversity Module Since there was no door available for the when I ordered…

Ocena
0 / 5
Polubienia
3
Pobrania
37
Wydruki
0
Wyświetlenia
302
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Module bay door for the "Realacc RX5808 Pro Diversity Module

Since there was no door available for the when I ordered mine I immediately began to design my own. Now Realacc offers a injection molded door but in my opinion it is not quite pretty. I am still working on improvements and will release newer versions as soon as I am finished.

Fits in my HD2 goggles fine and should also fit the V3.

V1: Initial version, basic looks and easy to print, mostly to test the fit V2: partly curved front to blend into the look of the goggles, no strong fixation in the bay

V2.4: some touchups, lager display cutout and snap in tabs to prevent the module from falling out, maybe sand down the corners of the nubs just a little bit because its really hard to get out otherway (just a few strokes with 450 grid).

Also added 2 additional versions with 2 holes instead of one big (you won't see the diversity LEDs underneath) one is with thick wall there (should be easier to print with some printers) the other one with a thin wall.

V2.5: Included a suggestion made by user Gc9n to feature a hole for a little buzzer. 9mm buzzers should fit nicely and with a little filing 9,6 should also. The front is left open on purpose so different length buzzers can be used

NOTE: If anyone has suggestions for improvements just post it in the comments, I can make them in the native SW format which is much easier and mostly nicer than adding something in STL.

Any suggestions for the BETA version for the Pro Plus module are welcome!

Print Settings

Printer Brand:

Ultimaker

Printer:

Ultimaker 2

Rafts:

No

Supports:

Yes

Resolution:

0,15

Infill:

100

Notes:

0,4 Nozzle is recommended (wall thickness)

Category: R/C Vehicles

Tagi