BMW i3 Centre Console Lid w/ Keyholder and MagSafe
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lid for the centre console in BMW i3, includes keyholder and room for MagSafe charger.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 478
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Standard Digital File License
Custom lid for the BMW i3 Centre Console with integrated MagSafe puck mount and key holder. The model includes an extra hole for cable passthrough, allowing you to route an additional wire (charger, GPS, etc.) into the console. Best fit is achieved with an extra leather layer around the lid (as shown in one of the pictures), but it also works fine without. The support arm is glued in a straight line from the cable hole under the MagSafe charger and roughly centred between the hole and the bottom edge of the lid. The MagSafe charger should be glued in place.
Leather used: https://www.skapemer.no/møbelstoff-vinyl-kunstskinn-140-cm