Marsh Foot Pole (Closet Rod) Ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A ring that can be fixed to a 1 5/16" wooden push pole / closet rod pole using an M3 size screw.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 1
- Wyświetlenia
- 63
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This started as kind of a funny joke and turned into something that may actually be useful - time will tell.
Duck hunters and other outdoor enthusiasts use push poles with things like an Avery Marsh Foot on the end of them, they are invaluable tools when navigating shallow, muddy backwaters. You can of course purchase expensive push poles from a variety of companies - there is no lack of companies eager to sell solutions to hunters. However, one of the cheapest and most durable push poles is an 8' length of 1 5/16" closet rod from your local home improvement store, they can be had for < $20, float and outlast the thing attached to them.
The marsh foot on our push pole wore out, and it wore out so thoroughly that there was no removing it from it's current pole without cutting it off. Not wanting our pole to be shorter than 8', I picked up another rod.
We had drawn some lines on our pole with a Sharpie as a visual guide to safe depths. One year, one of us took a full confident step off the boat into 6' of frigid water. Ever since then, we have marks for thigh high, chest high and neck high water on our push pole.
I thought it would be kind of funny to permanently memorialize the “great wader flooding incident” by making a ring that I could fix to the pole at about wader flooding depth. Then I thought hey rather than redrawing the lines one the pole every year, why don't I actually make this a thing and see if it works?
This is what happens when engineers hunt, have 3D printers and ADHD.
These turned out cooler than I'd anticipated. Maybe another duck hunter will find them useful, maybe someone that wants to separate their hangers in their closet will find them useful. The internal diameter of the ring is 31.5mm - smaller than 1 5/16" but these fit snugly on the closet rod I purchased. The design is fully parametric so if you need other sizes let me know.
I had stainless round/button top M3 size screws on hand so that's what I used. Normally I wouldn't recommend a machine screw for this application, but the round top sits just right in the screw hole and if you lightly pre-drill a hole for it they work quite well.
I printed these in Hatchbox PETG - Dark Green, Green, Yellow and Red using the .20mm STRUCTURAL and Generic PETG print profiles with a 4mm brim and 3 perimeters. I used my MMU3 to do height range color changes to get the bands I wanted, you should be able to achieve this using manual filament swaps in whichever slicer you use.