1 / 1

additional Indicator and Control Mount for Radiator Mount for CNC3020

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

SnowHead

@SnowHead_224364

additional Indicator and Control Mount for Radiator Mount for CNC3020

Ocena: 0 / 5
Polubienia: 0
Pobrania: 6
Wydruki: 0
Wyświetlenia: 171
Oceny: 0

Aktualizacja u źródła: 12 kwi 2022

Informacje o modelu

Źródło: Printables
Kategoria: Tools
Licencja: Creative Commons — Attribution — Noncommercial

Szczegóły Pliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (0)

In the previous simple version water pump and fans are always running on full speed which is not necessary, loud and annoying.

Additional to the already mounted parts with the parts provided here a temperature controller board can be mounted and, if wished, a flow- and temperature indicator too.

The board holder is mounted above the radiator holder with the same bolts. The case for the temperature indicator is glued on this holder. The flow indicator is glued on top of the case. The indicator case has two holes to mount two UV-LED to illuminate the vane.

The goal to not increase the size of the machine was reached. All parts are mounted within the original outer dimensions of the device.

To control the pump, the controller board must be a type for 2- or 3-wire fans. A 4-wire controller will not work because the pump doesn't have a pwm-control-input.

Watch a clip of the finished extension here: https://www.youtube.com/watch?v=BFLYIL3ggew

Controller: https://www.aliexpress.com/item/32922455086.html

Flow Indicator: https://amazon.de/gp/product/B07FLG7MQJ

Temperature Indicator: https://amazon.de/gp/product/B07N2WM7LL

Controller Sensor: https://amazon.de/gp/product/B07QLMFB1B