Radiator Mount for CNC3020
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Radiator Mount for CNC3020
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
With this two mounts a water cooling radiator can be mounted to the portal of a CNC 3020 milling router to replace the ridiculous water bucket cooling by a closed loop. No new holes have to be drilled because only the existing bolt holes will be used.
The holders for the tank/pump-combination are glued to the portal.
The goal to not increase the size of the machine was reached. All parts are mounted within the original outer dimensions of the device.
An improved version of the cooler is to see here: https://www.youtube.com/watch?v=BFLYIL3ggew . The improvements to be seen there can be found here: https://www.thingiverse.com/thing:4178050
Radiator: https://www.aliexpress.com/item/33007389407.html
Pump: http://aliexpress.com/item/32965180139.html
Tank: https://amazon.de/gp/product/B078PB8XNM
Fans: https://amazon.de/gp/product/B002KTVFTE
Print Settings
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.20 mm
Infill:
50%
Filament:
PLA black
Notes:
Printed in the given orientation no support will be necessary.
Category: Machine Tools