ThermoCam
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thermo-cam based on the sensor AMG8833 and a ESP8266-E12 NodeMCU
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Case, mount-plate, buttons and decoration for a thermo-cam based on the sensor AMG8833 and a ESP8266-E12 NodeMCU. It can be build for roundabout 80€.
Instructions, schematics and software are available on GitHub. Sorry for the only german description there. I was too lazy to translate that all.
Print Settings
Printer:
FIashForge Dreamer
Rafts:
No
Supports:
No
Resolution:
0.2 (0.1 for buttons)
Infill:
100%
Notes:
All parts are printable without support. Take care of a good layer adhesion to prevent the stands from breake on screwing.
Set for the first layer of Front and Back only one perimeter shell for a readable text and a better look. Don't smash the first layer to tight to the printplate to keep the gaps of the letters open.
I made the case out of PLA. It has the best properties to make the snap-in-mechanism of the front plate working. Here is a good layer adhesion essential too.
The Deko-Model ist not really necessary for the function but makes the camera looking authentic and protects the thermosensors surface. Fix it with some drops super glue.
Category: Electronics