SE3D Cover with magnetic mounting for Centauri Carbon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added room for 4 - 6mmx 1.65mm actual magnets to make the head toolless
- Ocena
- 3 / 5
- Polubienia
- 58
- Pobrania
- 310
- Wydruki
- 2
- Wyświetlenia
- 2158
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Same as original model except now the only 2 screws needed are for the fan. I used 20mm self taping m3 screws with a m3 washer! It amazing how much of the ghosting at higher print speeds is reduced with the reduction of weight in the mod as well as moving the center of weight closer to the movement of the x axis!
Magnets are designed to be press fit and very tight. put a small drop of super glue behind them and put them on the table pressing the part into the magnet. make sure to check polarity before installing the magnets on the other half.
I have been printing non stop for 2 days and the cover has not come off or anything!
Printed in elegoo Blue ABS