Metropolitano Stadium - Atletico Madrid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🇪🇸 🏟 ⚽ Easy-to-print miniature of a Spanish La Liga stadium. No supports, multipart assembly 🟥⬜
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 168
- Wydruki
- 0
- Wyświetlenia
- 1627
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Welcome to Spain's capital!
This multi-part assembly can be printed easily in colors even without MMU/AMS, although with it you can achieve even more realism and details.
See the assembly instructions further below.
Metropolitano Stadium, currently known as “Riyadh Air Metropolitano Stadium” for sponsorship reasons, is a major stadium in Madrid, Spain. It opened in its current form on 16 September 2017 after being remodeled from an older venue. It now has a capacity of about 70,000 spectators. it is the home ground of Atlético Madrid, a club that competes in La Liga, the top tier of Spanish football.
It hosted the 2019 UCL final, and could be a host venue in the 2030 World Cup (from Wikipedia).
MiniWorld3D is happy to bring this model to life as a homage to all the fans of Atleti!
This model was made by Dany Sánchez.
If you appreciate our work, please consider joining our Printables Club or Patreon!
printables.com/@MiniWorld3D
patreon.com/MiniWorld3D
Find all our profiles, YouTube channel & social media on:
Join our 40K followers on IG!
MiniWorld3D is a collective of 60+ artists creating the best library of 3D printable models of landmarks of the world!
Print photos: WalledMaps - note that the wooden frame and city base is not included. This model is just the stadium itself.
Names And Related Indicia Are Property of their respective owners. This model is fan work. No infringement is intended.
-----------
Printing Tips
Suggested parameters:
Fine-tune retraction to avoid stringing.
Perimeters: 2
Top layers: 3
Infill: 15%. Lightning pattern ok.
Supports needed only for the Roof part.
Assembly Instructions
Assembly is easy, all parts fit without cleanup, glue is necessary for a permanent fix.
The base, seats and pitch can be printed with colors even without MMU/AMS by pausing and changing the filament color.
- Base - start with dark brown or black, then switch to light brown or grey. This adds contrast to the logos engraved in the base.
- Seats - print red but switch to white at certain heights when stands change level. Alternatively, this piece also is provided as a pre-painted 3MF for MMU/AMS.
- Pitch - start with dark green, then light green, finally white.
The Seats part is provided as an alternative pre-painted 3MF file for MMU/AMS , it is the only piece that truly benefits from being multicolor.
Not recommended to print the reference whole model as it would need many supports, too difficult to remove.