Moondrop Space Travel 2 - Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a simple lid to protect the Space Tracel 2 from dust
- Ocena
- 4,5 / 5
- Polubienia
- 17
- Pobrania
- 206
- Wydruki
- 2
- Wyświetlenia
- 818
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Share Alike
When I was searching for existing Models, I found bulky or full covering cases. It seems I've overlooked the version from GustyCadets, because his model is very similar to my Idea.
I took a photo from the top as a reference and modeled the lid based on the photo. It turned out exactly, as I hoped. Sitting firm on my ST2 case.
It's designed for 0.4mm nozzles (0.48mm single wall for the most part), not sure if/how it would print on other nozzle sizes.
When printing, orient the model so that the top of the lid is placed on the build plate (see slicer screenshot).
#Update:
Added a slightly smaller/tighter version with thicker bottom and walls. If the normal version is too loose for you, try the “thick” version.