Minix Z100/Z300/Z150/Z350 outdoor mount (for telescope pillar)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mount for the Minix family of fanless mini-PCs.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This mount was primarily developed for telescope pier mounting. It provides basic mist/condensation protection for this fanless minipc. It won't protect from huge rain but some light sprinkles should be fine. the cable mounts on the sides ensure that water can't run down the USB cables.
It has recesses on the back of the mount that should fit common pillar diameters (including the four posts of a pier extension). The intended mounting is to use a long velcro strap through the provided slots. If mounting in a non telescope application, just put that strap as needed.
I recommend printing in PETG because this PC gets hot.