Core ONE Side Storage - Tray with Cutters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Core ONE Side Storage - Tray with Cutters
- Ocena
- 3,667 / 5
- Polubienia
- 13
- Pobrania
- 60
- Wydruki
- 4
- Wyświetlenia
- 727
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of a tray provided by Prusa Guy Side Storage for the Core ONE. I wanted a dedicated spot for my flush cutters. I also removed the spots for the least used tools that came with the Core ONE. As for the fitment and stability of the flush cutter; its a snug fit and has not fallen off during any of the printing I have done.
I did leave a blank area or "baby fat" on the tray for any future ideas or requirements.
NOTE: I did find after the Locking Pin location was corrected the side storage tray doesn't stay in place. So at this time I would recommend adding double sided tape to help keep it in place.
Version v2
Correct Locking Pin Location
Increase overall length by 0.4mm
Added a second file for a larger tray version