"The UnSpooler" - The Filament Unwinding Assistant
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This will assist your printer in unwinding those larger spools. Helping to keep the load off the extruder motor.
- Ocena
- 0 / 5
- Polubienia
- 7
- Wydruki
- 0
- Wyświetlenia
- 319
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Standard Digital File License
Now you can use a 5KG roll on any printer!
This will assist your printer in unwinding spools of filament up to 5kg. It can hold spools from 250 grams to 5 Kilograms. The only load it will see is the weight of the front arm, not the weight of the filament and the spool it is wrapped around. The UnSpooler will unwind as the printer calls for it, taking the load off of your extruder motor. These motors are getting smaller by the day and it puts a strain on them when they have to pull the material in and push the material through the hotend.
I have designed this to be as user friendly as possible. The UnSpooler has no code to insert into Klipper, Marlin, or your slicer. Just set it in place, load the filament, and as the machine calls for material it will raise the front arm and cause the roller to engage in unwinding material taking the load of your extruder motor.
The spool adapter is recommended for spools of 1Kg and smaller. 1Kg rolls can use the adapter with the wheels or just the end nuts to keep it in place. This also adds weight to the cardboard rolls to keep the spool from jumping around when it gets low on filament.
Difficulty Rating to assemble: Medium or slightly higher
Facebook Group: https://www.facebook.com/groups/3DPrinterModding