Articulated/Poseable Conch Robot - Gundam GQuuuuuuX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1:1 articulated and pose-able model of GQuuuuuuX's best boy.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 83
- Wydruki
- 0
- Wyświetlenia
- 696
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
Conch was easily my favorite character of Gundam GQuuuuuuX. He's just so damn cute, and I needed to have a little 1:1 scale version in my life.
The only other models I could find were some AI slop, so I decided to make it myself.
Conch is complete with fully articulated legs that can rotate and bend at three joints, a flip-up carrying handle, and both the flashlight and LCD display hatches are openable.
Everything is printed. No additional hardware is needed.
I've sized him to be roughly 1:1 scale, but if you want to make him a bit smaller, he can probably be shrunk to about 70% without much issue.
-------------------------------------------------------------------------------------
PRINTING:::
-Everything should be pre-oriented in the best position to print. You WILL need supports, and maybe a few brims, but I had no issues with my prints.
-2 walls and 15-20% infill works fine for most parts, but I'd suggest 3+ walls for the pins just to beef them up a bit.
-Any part with a "2x" or "4x" suffix in the file needs to be printed that amount of times. Everything else only needs one print.
-I kept the main body as one large piece, but you can subdivide it in your slicer if you wish.
-I've included ASSEMBLY_GUIDE.stl to show how the legs should piece together, and which pins go where... if the file naming wasn't quite clear enough. Everything else should be self-evident.
Enjoy!