1 / 7
Remix to use 1.58mm  or 0.064" welding rod — zdjęcie 1
1 / 7

Remix to use 1.58mm or 0.064" welding rod

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Love atsnailpace's compact opto servo probe. I was working on my own idea of this but his is far better done then…

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
185
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

Love atsnailpace's compact opto servo probe. I was working on my own idea of this but his is far better done then mine. I have a whole fist full of oxy/acetylene non fluxed welding rod and sized both the flag and the base to use this rod. Rod specs out at 1.58 or 0.064" which ever works for you.The rod is super cheap and can be gotten from pretty much any welding, farm, hardware store that sells oxy/acetylene kits. To install the rod all I had to do was put the flag into the base and then push the rod in to the flag. I also modified the servo arm for the screw hole and to add the teeth and sizing for the servo's I have. From other projects it looks like the servo's have all kinds of different sizes and I got lucky when I found one that works with my servo's.

I have not cut in the wiring or started in the process of putting this abl on my printer but will do so shortly. I will update this when I am done.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

Yes

Supports:

No

Resolution:

0.1

Infill:

20%

Filament: cctree pla blue


Notes:

I use a skirt and no supports. Printed out great. I usually only use 0.2 resolution but I wanted the flag to have a bit better resolution.

Category: 3D Printer Accessories

Tagi