1 / 4
Diffuser / stand for Streamlight Wedge XT
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
Works as a diffuser and flat stand for the Streamlight Wedge XT EDC flashlight. Use it as handheld or set it on a flat surface to light up a room.
Pro tip: if you print from orange filament, it also serves as red cap, useful for retaining night sight. Red filament didn't work that good for me but feel free to experiment.
No supports needed, 0.30mm is OK if you don't require high quality. PETG filament recommended due to possible high temperature of the flashlight. ** Even with PETG be careful especially on high settings (I use my flashlight on low by default anyway).