1 / 1
EVGA 3080 FTW3 Deshroud 120mm & 140mm Fan Bracket — zdjęcie 1

EVGA 3080 FTW3 Deshroud 120mm & 140mm Fan Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Deshroud mod to mount 140mm fans to the EVGA 3080. may also work for 120mm.

Ocena
0 / 5
Polubienia
3
Pobrania
33
Wydruki
0
Wyświetlenia
337
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

deshroud mod for EVGA 3080

You'll need 2 GPU adapter cables if you want to have PMW control of the fans through the graphics card. These are the cables I got.

https://www.amazon.com/CRJ-4-Pin-PWM-Adapter-Cable/dp/B0CV74LRLN?source=ps-sl-shoppingads-lpcontext&ref_=fplfs&psc=1&smid=AQ8OIL3FGVKZE

You'll need to print in a material that's heat resistant. I used Qidi PA-CF, but ASA or ABS should be fine.

You will need to use the screws removed from the stock fans on the GPU to mount the bracket.

Any long screws used for mounting fans to radiators will work to mount the fans to the bracket.

Tagi