Refined modular gridfinity drawer collection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A well-designed fully 3D-printed drawer system.
- Ocena
- 5 / 5
- Polubienia
- 49
- Pobrania
- 233
- Wydruki
- 1
- Wyświetlenia
- 1363
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi everyone,
I’ve made a few updates to the model. The standoffs aren’t the most stable (feel free to remix), so the system should be secured somehow to keep it from wobbling. Be awere when instaling the standoffs to cases that are not Printed with stiff enough material, without decent support they will deform (tested with PLA and the effect makes the cases unusable (No problem without standoffs))
I also added two changes to the case: the holes in the back let you push out the connectors with a rod, hex key, etc. The closed shells are mainly for dust protection and also helps with printability on less capable printers.
On top of that, I’ve added drawers without the Gridfinity pattern so you can store regular, larger items as well.
For best results, the drawers need a decent printer with low stringing and good bridging — otherwise they can be hard to move. The model printed great on my Bambulab P1S, but my old Ender 3 struggled a bit (closed shells help with it very much).
Have fun with it!
Cheers,
Lukas