Bontrager Duo Blendr Mount - Longer Reach Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Custom Bontrager Duo Blendr Mount to add some extra reach below the stem for an aftermarket light
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to use my light with the Blendr mount on my bike, but I couldn't find a stock solution that seemed suitable. The mount uses standard GoPro-style fittings, so it should be compatible with a wide range of accessories. I have this fit on a Trek Checkpoint SL6, which I believe use “Pro” stem size.
This is the second minor iteration of the mount. I used the first version for just over a year before it developed a small stress fracture and broke apart in the lower area. I've since made some slight modifications in an effort to prevent that issue in the future.
The mount is assembled using M3x3 heat-set inserts, but it should work fine with M4s as well. Use either M3 or M4 socket cap screws, note that M3 screws will require a washer.
For printing:
Supports are required between the fins. I've included my print-ready file, which features custom supports and utilizes an alternate support interface material in Bambu Slicer for the fins. I've printed the mount in PETG, and it seems to perform well.
Print orientation:
Note: I've included some small custom supports under two areas to avoid excess filament changes when using alternate support interface material.
I've also included my Fusion 360 files in case you'd like to dig into them for any customizations.