Jedi Cosplay Gauntlets - Clone Wars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetized Jedi gauntlets, various included sizes.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 209
- Wydruki
- 0
- Wyświetlenia
- 678
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial
These gauntlets are designed to be held together with pins and magnets, and feature recesses for foam inlays for fit/comfort. Many size variations of the gauntlets are included in the ZIP files, scaled appropriately to fit the needed hardware. Two versions are available for each file set, full gauntlets and split gauntlets for printing on smaller machines. STEP files are also included of the main gauntlet for remixing. Enjoy!
Hardware (per gauntlet):
4x 3x20mm pins (or 6x pins for split body version)
24x 10x4x2mm neodymium magnets (or 12x 10x4x4mm)
Super glue
3/8" Craft foam
Assembly Guide:
Assemble the gauntlet by super gluing the 4x main pins into the main body sections and check for fit. You may need to ream the holes out with a drill bit to get the pins to fit properly, depending on material and print settings. Once the two halves of the gauntlet can be opened and closed smoothly, super glue the magnets into place on each half, making sure to check for polarity. Then optionally add foam into the recessed pockets on each half for more comfort.