Soda Pop Tab Container
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A soda can–shaped container with a threaded lid, perfect for storing soda pop tabs or small items.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 154
- Wydruki
- 2
- Wyświetlenia
- 395
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I noticed there weren’t many soda pop tab containers on Printables, so I decided to make one! This design has a threaded lid and is styled to look like a soda can.
For best results, I recommend using fine layer heights when printing the can side so the threads come out clean. I also had good success slowing down the print speed on the last few layers where the threads are formed, printing too fast here can cause them to turn out poorly.
The screw-on lid printed great for me with no supports and no changes to speed or layer height.
Hopefully this fun little pop tab container serves your needs (and maybe adds a bit of novelty) for years to come!