Record Changer Repair Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stand that will allow repair of record changer. It allows the changer to be flipped to work on either side.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 56
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
When working on a turntable, it is useful to have it so that you are not resting the mechanism on the table. this stand allows for flipping the turn table faceup or face down to work on it without laying the turntable directly on the table. I found three legs worked really well.
I used this for a vintage RCA record changer, (RP-205) but it should work for most any turntable that have a downward facing lip around the edge.
The part is threaded for ¼-20x1" bolt. It may be necessary to run a tap through the holes for smooth operation.
To build the legs:
Import the model into your slicer
Separate the model into the two objects
Rotate the top piece 180 degrees, so that it lays flat on the bed.
I have included 3 files All files contain the same leg, just in different formats. The third STL file contains 3 legs already oriented for printing.
Record Player Stand (STEP file)
Record Player Stand (STL file)
Record Player Stand 3 legs (STL file)
Updates:
1/11/2026 Added new leg that (V5) that has a cutout on the top to clear a tonearm that might be in the rest position. I recommend using this leg instead of the others