The Gilded Realms Insert Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organizer for Gilded Realms which supports sleeved cards
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Card and token containers to store sleeved cards and make the setup of the game easier.
Note: I used Sleeve Kings sleeves SKS-8803 and SKS-8814 for the cards (60 microns). Thicker sleeves might not fit as the space is optimized for these and if the cards are not sleeved then it would be possible for tokens to slip out of the side notches which are present to make it easier to remove the cards from their container.
There are Province Card containers for each player and each faction's cards and tokens are stored in their own boxes with the cards on top. The lids are friction fit.
If you don't have an AMS to print the multi-colour lids then the svg images canhave their type changed from modifier to negative, but the lids are quite thin and the result can start to show on the underside of the lids.
There are two spacers included in the project but only the lower spacer is really needed if the game is stored vertically.Card and token containers to store sleeved cards and make the setup of the game easier.
There are also province/realm card holders designed to keep the five stacks of cards organized on the table-top. These are not included in this project as they won't fit in the box with everything in this model and can be found here.
3mf file was created in Bambu Studio with 0.4mm nozzle, 0.16mm layer, 2 wall loops.