Stomp-Rocket Launchpad w screw in parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Stomp-Rocket Launch pad w/ separate parts for easier printing and sanding.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 2
- Wyświetlenia
- 452
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
I found the original all-in-one stomp-rocket launchpad to be a little challenging to sand smooth. In addition as the printhead moved between the towers a line was left on the towers. This variation uses threaded parts to allow you to print the upright separately and screw them in.
I printed this with a .6mm nozzle, and .15mm layer height. Note only the threaded sections really benefit from thin layers, so you can use variable layer height to speed up printing.
This is a stomp-rocket launch pad remix. You will need the rocket and plunger from Lobocnc's original model. Thanks Lobocnc for this great print!
Enjoy