Mazda Striker Hook NE51-R1-344A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A facsimile of the striker hook for the Miata. Tested on an NC Miata. 100% infill ABS or similar required.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the hook that keeps the soft top down when stowed. Mine snapped and it was more convenient to model and print a similar enough version. Costs about $15-$30 depending on your local dealership or factoring in shipping.
https://www.tascaparts.com/oem-parts/mazda-striker-ne51r1344a
Knowing this is 3D printed, I push down and back to help guide the soft top down; good practice even if you replace with the factory one. Driven down the freeway for many hours without concern. If this were going to break again, it would be when attempting to stow the soft top.
Tested with 100% Infill using ABS. Reuse the factory metal bushings to prevent the screw from crushing the plastic.
As always, print and use at your own risk.