Jewel Case MiniDisc Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a great way to display and store your MiniDiscs that are inside of a MiniDisc Jewel Case!
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello fellow MiniDisc enthusiasts!
I could not find any display/storage models that were specifically made for MiniDiscs utilizing Jewel Cases. Seeing how this is my favorite way to store MiniDiscs I decided to make a very simple and minimal model to do just that!
There are currently three models. A single slot, a five slot, and a ten slot. You can duplicate these models to create as many slots as you want.
Honestly this is a very simple print and your default settings will probably work fine. These are the settings I used inside of the Creality Print software.
*No Supports Necessary
*PLA/PETG
*First Layer Height = 0.2
*1.6 Layer Height
*Wall Loops = 2
*Sparse Infill Density = 15%
*Sparse Infill Pattern = Grid