Sign: "Notice - No dog shitting", multicolour MMU3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-part sign for easy colouring
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 95
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution
No dog pooping thank you
The above statement may or may not work but why not make it funny while at it. Using this sign may or may not work as well or better or worse. Still, it should have the dog equipped users stop and ponder what's that sign really about.
May work even better if backlit.
Background
This is done by myself using OpenSCAD with PNG originally from image generating diffusion model, then edited with Pixelmator to be 2-color PNG. In OpenSCAD that PNG is imported and extruded with surface() to create the image positive. The texts and outlines are made with OpenSCAD code. All of this code (around 170+ lines all in all) is 100% coded by myself. I have around a dozen different designs up for sale at Finnish marketplace Tori and Huuto, but this design doesn't seem to sell at all (maybe because it's in English, plus the joke is pretty stupid - who knows what else). So, I'll just leave it here in case someone finds it funny enough to use. I'll keep the OpenSCAD source code to myself for now, though. Maybe if there's enough interest I might look into refactoring it to a state where I'm not too embarrassed to give it out. It's pretty bad spaghetti as of now, since this started as a joke and it's frankly been just one more little joke for close to 20 times now.
Printing
This prints 4 layers, all 100%. You should color the areas with the prusa slicer smart fill tool, and make an attempt to reduce the colored areas to two layers high, to get two full background color layers at the back. This saves print time a lot, by not changing colors on the 3rd layer. I might be able to fix this in OpenSCAD but I'm just not that interested in this project as of now.
The size is about 25x19 cm, so it pretty much fills the build plate and leaves enough space for you to have the color change area.
How to align parts
Drag and drop part1 and part2 at the same time to the prusa slicer, then when asked if these are parts, click Yes. This aligns the two parts correctly. Then rotate view from under build plate (this prints face-down!) and color the areas.
The pictures look different
Yes, the images I took are of v1.0, that's using slightly different PNG. V2.0 has minor code cleanup and the PNG has been corrected after the initial 1.0 test print. That didn't sell (so far) so I never actually printed a 2.0 version of this design. The same OpenSCAD code generated STLs (with different texts and PNGs) are printed multiple times however, so these STLs very much “should work”.