Gridfinity Organizer for CNCKitchen C245 Heat-Set Insert Kit (1×3, 6u)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1x3 Gridfinity model for the heat set insert kit from CNCKitchen, including C245 soldering iron tip and 3/8" insert
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A 1×3 Gridfinity bin (6u tall) designed to hold the CNCKitchen Heat-Set Insert Kit (C245 standard).
Includes dedicated slots for the full kit plus the 3/8″ tip.
I realised after printing that it doesn't make sense to include the thread pitch on the designation of the tip, so I fixed the model but didn't reprint it.
This bin is stackable—the tops of the inserts sit flush with the bottom of whatever you place above.
No magnet or screw holes.
Print Instructions
Material: PLA or PETG
Layer height: 0.2 mm (text is 0.4 mm thick)
Infill: I used 5% Gyroid
Supports: Not required
Multi-colour (MMU): Set “Gridfinity bin 3×1×4” to your box colour, and all other parts to your preferred text colour.
Multi-colour (no MMU): You should be able to insert a colour change at 20.2mm