DREMEL Accessory Rugged Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I created this box for my DREMEL accessory as a compact organizer that can be handy along.
- Ocena
- 4,667 / 5
- Polubienia
- 606
- Pobrania
- 1494
- Wydruki
- 3
- Wyświetlenia
- 13 864
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I created this box for my DREMEL accessory as a compact organizer that can be handy along.
If you noticed the top and bottom, its because I have used a carbon fiber textured build plate, though you can use your preferred build plates according to your 3D printer settings.
================================================================================
Below are the parameters of per plate for your reference of the print profile:
Plate 1 - Top Lid:
Filament = Bambu Lab PETG-HF
Nozzle = 0.4mm
Layer height = 0.16mm High Quality
Wall loops = 2
Sparse infill density = 20%
Sparse infill pattern = Gyroid
Plate 2 - Base:
Filament = Bambu Lab PETG-HF
Nozzle = 0.4mm
Layer height = 0.16mm High Quality
Wall loops = 2
Sparse infill density = 20%
Sparse infill pattern = Gyroid
Plate 3 - Seal:
Filament = Bambu Lab TPU 95A-HF
Nozzle = 0.4mm
Layer height = 0.16mm High Quality
Wall loops = 2
Sparse infill density = 100%
Sparse infill pattern = Rectilinear
Plate 4 - Latch:
Filament = Bambu Lab PETG-HF
Nozzle = 0.4mm
Layer height = 0.16mm High Quality
Wall loops = 4
Sparse infill density = 20%
Sparse infill pattern = Rectilinear
Brim width = 5mm
================================================================================