1 / 1
Meanwell LRS 350 Noctua NF-A9-14 ventilated cover — zdjęcie 1

Meanwell LRS 350 Noctua NF-A9-14 ventilated cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Noctua NF-A9-14 90mm fan cover for Meanwell PSU. Although intermittent, the stock fan on the Meanwell LRS 350W is loud…

Ocena
5 / 5
Polubienia
27
Pobrania
190
Wydruki
4
Wyświetlenia
1151
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Noctua NF-A9-14 90mm fan cover for Meanwell PSU.

Although intermittent, the stock fan on the Meanwell LRS 350W is loud when running. Switching it out for a 90mm noctua fan significantly reduced the fan noise.

I've reduced the hex mesh from the original model at the top of the PSU so air is channelled through the components before being exhausted.

The model has an internal hook for cable management. I ended up not using this on my own PSU. The fan should be mounted on the outside of PSU cover - there's insufficient space to mount inside.

I chose to trim the A9-14 cable to length and fit a new 2 pin JST-XHP connector. The A9-14 is a 4 pin fan, you only need connect the yellow (+) and black cables to the PSU connector. On my LRS 350 the positive pin was on the right hand side.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

Doesn't Matter

Resolution:

0.2

Category: 3D Printer Parts

Tagi