Extension for Prodigy (and other 2011?) factory basepads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basepad extensions to extend the 17 round (126mm) factory Prodigy to about the same length as the 20 round (140mm) ones.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I like all of my magazines to be the same length when on my belt so I created these extensions.
The “lock” replaces the factory part and accepts a #5 x 5/8" screw.
There is no additional capacity added to the magazine, just an increase in overall length.
The extensions in my photos were printed in PETG at 0.3mm layer height, 4 perimeters, 15% gyroid infill and with 0 bottom layers in order to get the infill patter on the bottom of the extension.
I added fuzzy skin in PrusaSlicer with the "Smart fill" tool with a 3 degree angle and selected three locations on the “base” part to improve grip.
Moving the seams to the rear improved the overall quality of the printed parts.
Use supports for the “lock” part.